Dave Elliot shows strength in economic turmoil

Dave Elliot distinguishes his business from the competition by slowing down and keeping strict standards.

"The past years’ economic challenges have not been a problem for my business—in fact, I think they’ve made my business even stronger because I’ve separated my business from the competition,” says Dave Elliot, owner of David’s Custom Trimmers, Brisbane, Australia. “We offer products other similar businesses don’t offer in terms of strength and neatness, and also in terms of innovation."

In pursuit of perfection

Elliot’s business is now entirely focused on the marine canvas and upholstery markets, but his entrance into the specialty fabrics world came when, in tenth grade, he began working as an apprentice for an automotive upholsterer. By the third year of his apprenticeship, the owner opened a second workshop and left Elliot in charge of the original location. One week out of the apprenticeship he left to start his own business. “I was highly motivated to have my own place,” Elliot says. “I have always been a perfectionist and wanted to run things my own way."

Elliot was fortunate to launch David’s Custom Trimmers—at that time an automotive upholstery shop—with two steady clients that had ongoing upholstery needs. As a part of his apprenticeship program, he had attended three six-week blocks of classroom education through Brisbane North Institute of TAFE (Technical and Further Education) college. When he graduated, one of his professors provided him with the starter clients for his new business—Jaguar and BMW car clubs that the professor used to do work for. “Within the first year of my business I only had one quiet week,” Elliot says. “And that’s the only quiet period I’ve had in 34 years of business."

Neatness counts

As a part of Elliot’s coach and motor body trimming apprenticeship, he learned to use gluing systems during the manufacturing process. When he began taking on marine canvas and interiors work in addition to automotive upholstery he experimented with applying gluing techniques to that process as well. The glues Elliot refers to include contact cement, double-sided tape, super glue-based glues, hot melt glues and PVC glues. “Some glues are used to increase strength of the product and others are only used to hold materials in place while you sew,” Elliot says. “When everything is held in place before you sit down to sew, you get neatness.” Ten years into the business, Elliot discontinued the automotive portion of the business to work exclusively on marine canvas and upholstery.

Examining other fabricators’ work is another strategy Elliot uses to improve and develop products. “My goal was (and is) to be one of the best at what I do, so I look at products manufactured by others, analyze them and find better ways of producing them,” Elliot says. “In particular, I look at the failure points and step by step try to eliminate them."

For Elliot, analyzing other fabricators’ work has included walking around the marinas in winds exceeding 25 knots and watching how boat covers were performing under those windy conditions. “We had one of the biggest storms ever here in January [2013]. We had about 36 hours of up to 76-knot winds in the marina,” Elliot says. “I wasn’t allowed to walk through—though I tried—but out of all my covers down there I only had one cover fail, and it was five years old. I’ve spent the last several months repairing other people’s work, and analyzing where they went wrong."

Innovation and evolution

Product innovation is often the result of customer demand, and when Elliot develops and/or improves a product it can serve as a new revenue stream, as well as advertising for the company. “I started providing accessories—things like hand-sewn leather on steering wheels, steering wheel covers, fender covers—because customers asked me to,” he says. “The products evolve over time

One recent new product for Elliot was the result of the marina being updated and rebuilt. The marina in which Elliot’s shop is located is in the process of converting its timber-based marinas to sleeker plastic-based concrete tops. One of his customers requested that he alter the design for the old fenders to fit the new marina, a design that requires a specific bolt-on system. Elliot and one of his employees worked on perfecting the design, and have built about 1,000 yards of the fenders so far. “The marina probably still has another six months until it’s finished, so I anticipate continued demand,” he says. “And the ability to get my company’s name on the fenders around the marina helps get the message out about the package I’m delivering to customers. They can say to their friends: ‘He doesn’t only do canvas work. He’ll do the bumpers for your boats as well."

To increase profit, Elliot and his crew build their own bolts for the fender systems. “The jetty specialists wanted me to buy their bolts at $3 each—and I can make my own at $1 each,” he says. “When you’re talking 1,000 yards of fenders, there are probably 3,000 bolts. That’s an extra $6,000 in my pocket."

Parts of a whole

Elliot points out that the more control you have over the various components used to produce an end product, the better that product will be. Elliot’s shop has always done its own aluminum framework, began doing stainless steel frames about six years ago, and added the ability to do welding within the last three years. “A lot of canvas people don’t have the ability to manufacture their own framework—and if you can’t get the frame right, you can’t get the cover right,” Elliot says. “If I’ve done my job properly you will see the whole boat as a finished project, not as covers and canvas work that look like add-ons. If I’ve designed it properly it becomes a part of the boat.

"The goal is always perfection."

Sigrid Tornquist is a freelance author and editor based in St. Paul, Minn. She is also the associate editor of InTents magazine, a publication of the Industrial Fabrics Association International.

Comments

There are not yet any comments.
You can submit a comment using the form below.


Submit a Comment

Required. Will appear next to your comment.
Required. Will not be displayed on site or used to send unsolicited messages.
If applicable. A link to your site will appear with your comment.
Optional. Will appear in bold type above your comment.