TEXTILES.ORG
New absorber systems improve the quality of laser-welded seams on technical
textiles
As part of the research project “Absorber systems for the laser welding of textiles,” scientists at the Hohenstein Institute (Bönnigheim) and the DWI Leibnitz Institute for Interactive Materials (Aachen) have developed new absorber systems for laser welding technical textiles in the infrared spectrum. The researchers have already used them to weld all kinds of different textile materials.
With the results of their research, the scientists have overcome one of the main challenges of laser welding: only a few textiles absorb laser radiation in the near-infrared light spectrum and are therefore intrinsically suitable for laser welding. To join other textiles successfully, you have to apply absorber materials to the proposed locations of the seams which absorb the near-infrared light, melt and so join themselves together. However, the absorbers that were commercially available until now have caused discolouring around the seams on light-colored materials and so their potential applications were limited.
The new absorbers produce a technically high-quality bond between textile materials. The seams are resistant to liquids, mechanically strong, flexible and free of any discoloration, opening the way for laser welding to be used as an alternative, highly effective and promising technology for bonding textiles. Laser welding offers a number of advantages over traditional joining methods. The seams can be made watertight in a single process. This means that, in contrast to traditional seams, the subsequent “taping” of the seams, whereby special tapes are applied to seal the
holes caused in the textile material by the stitching needles, is no longer necessary. Seams created by laser welding are also flat, stretchy, flexible and proof against liquids
and gases, as well as offering impressively high tensile strength.
Thanks to automatic in-line monitoring of the welding process, the quality of the joint is
measured automatically, avoiding seam failures. The cost of checking seam quality is minimized, which is especially important in the manufacture of high-quality products such as medical textiles, protective clothing, outdoor equipment and textiles used in vehicle manufacture and furniture making.
During the project, the setting parameters for laser welding such as the temperature, speed and pressure were adjusted to suit various different absorbers and textiles. This will enable the manufacturing companies to use the process directly for their own materials and product range.
The new-formula absorbers are easy to use, economical and compatible with different textiles (woven, knitted and warp-knitted textiles, nonwovens, laminates, etc.) and accessories (zips, reflectors etc.). Especially on light and transparent textiles, they produce visually and mechanically perfect seams with excellent performance characteristics. Laser welding is suitable both for one-off manufacture and for manufacturing with a high degree of automation. Minimizing the number of process stages and increasing the quality, together with the high flexibility of the process, will help small and medium-sized companies to increase their turnover and should provide a competitive advantages.