This page was printed from

Automatic foam analysis

Products | June 29, 2016 | By:

KRUSS_rmfa_detail_from_below_15cmThe Ross Miles Foam Analyzer (RMFA) is an instrument that measures foam height electronically. An LED bar and sensor bar are fitted along the intake vessel, and foam height is detected based on the difference in brightness at the foam-air boundary. The electronic height detection provides repeatability of the measurement and, with a resolution of 0.4 mm, achieves precision. The RMFA is used with KRÜSS’s ADVANCE software, which records data for the transient behavior of the foam and liquid height.

Hamburg, Germany
+49 40 514401-0

Share this Story

Leave a Reply